Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number EXL56B, a Acme Cleveland Corp item with the NSN 3416001507111 that is listed alongside the description “Lathe Engine.” If you are interested in part number EXL56B and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number EXL56B is specifically listed with the NSN 3416-00-150-7111, and this code can be used to determine that it falls under FSC 3416 Lathes. Additionally, while tracing back to Acme Cleveland Corp, this NSN part was specifically produced under CAGE Code 54522. With our services and dedication to simple procurement in mind, get started with us today!
| MRC | Criteria | Characteristic |
|---|---|---|
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | APGF,BTWB,BTZR,BTSZ,AWLX,ASHK,ACDC,ELEC,FREQ,FAAZ,AAXX |
| BTTD | RATED SWING | 10.000 INCHES MINIMUM AND 11.000 INCHES MAXIMUM |
| BTTG | SWING OVER CROSS SLIDE | 6.250 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 60 |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 MORSE |
| BTYQ | CARRIAGE QUANTITY | 1 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| ACDC | CURRENT TYPE | AC |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 3 JAW UNIVERSAL CHUCK 6 IN.; 2 CENTERS,SOLID,60 DEGREES,NO. 2 MORSE TAPER; 1 SPINDLE SLEEVE BUSHING,NO. 2 MORSE TAPER; 1 CHUCK,DRILL,NO. 2 MORSE TAPER; 1 STEADY REST; 1 TOOL POST |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| SR-5 | DESIGN CONTROL REFERENCE | EXL56B |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 60 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| SR-5 | MANUFACTURERS CODE | 54522 |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| AWHA | BED TYPE | SOLID |
| SR-5 | THE MANUFACTURERS DATA | |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 240.0 PER INCH |
| FAAZ | PHASE | THREE |
| AAXX | MOUNTING TYPE | FLOOR |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| APGF | DESIGN TYPE | SCREW |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 50.0 TO 1350.0 |
| BTTF | ACTUAL SWING OVER BED | 10.125 INCHES NOMINAL |
| ADQR | CENTER TO CENTER DISTANCE | 36.000 INCHES NOMINAL |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
