Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number AY201S4B1, a Aero International Inc item with the NSN 5990008030486 that is listed alongside the description “Synchro Transmitter.” If you are interested in part number AY201S4B1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number AY201S4B1 is specifically listed with the NSN 5990-00-803-0486, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Aero International Inc, this NSN part was specifically produced under CAGE Code 0SML3. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-803-0486 Item PartTypeName: SYNCHRO,TRANSMITTER | 5990 | 008030486 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| QB71950-4 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| ABHP | OVERALL LENGTH | 2.1310 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJST | ROTOR INPUT CURRENT RATING | 125.0 MILLIAMPERES MAXIMUM |
| AJSW | ZRO RESISTANCE IN OHMS | 47.00 NOMINAL |
| AJTE | ZSO-90 RESISTANCE IN OHMS | 6.10 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -1.0 TO 1.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 2250.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 260.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 43.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 28.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1120 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | 12.50 NOMINAL |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 15 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS MAXIMUM |
| AJSY | ZSO RESISTANCE IN OHMS | 10.30 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 44.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 16.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 7.00 NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 2.0 CENTIMETER-GRAMS NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.5910 INCHES NOMINAL |
| CQZS | SHAFT SLOT DEPTH | 0.0210 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0210 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8750 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
