Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 2418, a Aeroflex Weinschel Inc item with the NSN 5985000804688 that is listed alongside the description “Attenuator Variable.” If you are interested in part number 2418 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 2418 is specifically listed with the NSN 5985-00-080-4688, and this code can be used to determine that it falls under FSC 5985 Antennas Waveguides and Related Equipment. Additionally, while tracing back to Aeroflex Weinschel Inc, this NSN part was specifically produced under CAGE Code 93459. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5985-00-080-4688 Item PartTypeName: ATTENUATOR,VARIABLE | 5985 | 000804688 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2418 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFS | APPLICATION DESIGN | TRANSMISSION LINE |
| AAQL | BODY STYLE | COAXIAL TYPE |
| ABHP | OVERALL LENGTH | 6.938 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 2.875 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 5.500 INCHES NOMINAL |
| AHTW | VOLTAGE STANDING WAVE RATIO | 1.50 |
| AHUC | COAXIAL CONNECTOR SERIES DESIGNATION | N |
| AJDB | POWER RATING | 2.0 WATTS AVERAGE |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
| ASYC | INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.8 |
| ASYD | OVERALL ATTENUATION RANGE IN DECIBELS | 0.0/10.0 |
| ASYF | ATTENUATION VARIATION METHOD | STEPPED |
| ASYG | STEP POSITION QUANTITY | 50 |
| ASYH | ATTENUATION PER STEP IN DECIBELS | 0.2 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 3 THREADED HOLE |
| BNGR | FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 1.000 GIGAHERTZ MAXIMUM |
| BQNR | OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.20/0.20 |
| CGGK | MOUNTING THREAD QUANTITY | 32 PER INCH |
| CQTQ | ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 KNOB W/DIAL |
| CQYJ | MOUNTING FACILITY PATTERN | ISOSCELES TRIANGLE |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.190 INCHES |
| CSQJ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | 4.500 INCHES NOMINAL |
| CTGG | IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| TEST | TEST DATA DOCUMENT | 06845-4017479-0701 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 CONNECTOR,COAXIAL,FEMALE AND 1 CONNECTOR,COAXIAL,MALE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
