Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 748032-40, a Air A Plane Corp item with the NSN 3010008563890 that is listed alongside the description “Gearcase Motor.” If you are interested in part number 748032-40 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 748032-40 is specifically listed with the NSN 3010-00-856-3890, and this code can be used to determine that it falls under FSC 3010 Torque Converters and Speed Changers. Additionally, while tracing back to Air A Plane Corp, this NSN part was specifically produced under CAGE Code 03529. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-856-3890 Item PartTypeName: GEARCASE-MOTOR | 3010 | 008563890 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MF482-105-1 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 7.000 INCHES |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPH | TORQUE RATING AND TYPE | 220.0 INCH-POUNDS STALLED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | DAMPER AND HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.940 INCHES SINGLE END |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.750 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.400 SINGLE OUTPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| AAJU | OVERALL LENGTH | 6.510 INCHES |
| AAJV | OVERALL WIDTH | 5.410 INCHES |
| AAUH | SPLINE MINOR DIAMETER | 0.4850 INCHES NOMINAL SINGLE END |
| ABSA | SPLINE QUANTITY | 17 SINGLE END |
| ABWV | SHAFT DIAMETER | 0.5000 INCHES NOMINAL SINGLE END |
| ACDC | CURRENT TYPE | AC INPUT |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-SHADED POLE |
| AXFH | SPLINE LENGTH | 0.940 INCHES NOMINAL SINGLE END |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 3 UNTHREADED HOLE |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| CNXS | POWER RATING | 28.0000 WATTS OUTPUT |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.840 INCHES SINGLE END |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.250 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| FAAZ | PHASE | SINGLE INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 9 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
