Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 516-2694-001, a Alcatel Lucent item with the NSN 3040007572794 that is listed alongside the description “Shaft Shouldered.” If you are interested in part number 516-2694-001 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 516-2694-001 is specifically listed with the NSN 3040-00-757-2794, and this code can be used to determine that it falls under FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, while tracing back to Alcatel Lucent, this NSN part was specifically produced under CAGE Code 95104. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-757-2794 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 007572794 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 516-2694-001 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHH | FIRST END GROOVE DIAMETER | 0.1750 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.1875 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.2496 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.0550 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.0830 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| AAGZ | FIRST END STYLE | TWO CIRCULAR GROOVES |
| AAHG | FIRST END GROOVE WIDTH | 0.0300 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CROSS DRILLED HOLE AND SLOTTED |
| ABHP | OVERALL LENGTH | 1.908 INCHES NOMINAL |
| AKTN | SECOND END SLOT WIDTH | 0.01130 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.0200 INCHES NOMINAL |
| AMFC | FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.0720 INCHES NOMINAL |
| AMGR | SECOND END SLOT DEPTH | 0.1875 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 0.2200 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.250 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | BOTH ENDS FLATTED,1ST END 0.188 IN.ACROSS FLATS,2ND END 0.220 IN.ACROSS FLATS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
