Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number TX1026C5D19A, a Alcoa Fastening Systems Ltd item with the NSN 5305016603482 that is listed alongside the description “Screw Close Tolerance.” If you are interested in part number TX1026C5D19A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number TX1026C5D19A is specifically listed with the NSN 5305-01-660-3482, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Alcoa Fastening Systems Ltd, this NSN part was specifically produced under CAGE Code C4293. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-660-3482 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 016603482 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1026C5D19A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| BQDM | HOLE TYPE | DRILLED |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.6415 INCHES MINIMUM AND 1.6715 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.138 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.221 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AAWU | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH |
| AHYM | NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAUB | HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.5465 INCHES NOMINAL FIRST HOLE |
| ZZZK | SPECIFICATION/STANDARD DATA | 76301-3-1169 MANUFACTURERS STANDARD |
| AGAV | END ITEM IDENTIFICATION | F/A-18 E/F |
| AASL | HEAD DIAMETER | 0.6230 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE TENSION HEAD,GEAR DRIVE RECESS - PH13-8MO(125 KSI SHEAR)INCONEL 718(125 KSI SHEAR),6AL-4V TITANIUM(95 KSI SHEAR) |
| ANEE | GRIP LENGTH | 1.1775 INCHES MINIMUM AND 1.1975 INCHES MAXIMUM |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
