Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number TX1026D4-15A, a Alcoa Global Fasteners Inc item with the NSN 5305015138895 that is listed alongside the description “Screw Close Tolerance.” If you are interested in part number TX1026D4-15A and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number TX1026D4-15A is specifically listed with the NSN 5305-01-513-8895, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Alcoa Global Fasteners Inc, this NSN part was specifically produced under CAGE Code 92215. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-513-8895 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015138895 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HP1169D4-15 | 5 | 8 | E |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.506 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.249 INCHES NOMINAL" |
| AAVA | POINT DIAMETER | 0.425 INCHES NOMINAL" |
| ABQJ | POINT STYLE | FLAT" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AGAV | END ITEM IDENTIFICATION | ITEM USED ON FIGHTER AIRCRAFT-FIRST (F18 E/F)" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ANEE | GRIP LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 28" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS" |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH" |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.506 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.249 INCHES NOMINAL" |
| AAVA | POINT DIAMETER | 0.425 INCHES NOMINAL" |
| ABQJ | POINT STYLE | FLAT" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AGAV | END ITEM IDENTIFICATION | ITEM USED ON FIGHTER AIRCRAFT-FIRST (F18 E/F)" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ANEE | GRIP LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 28" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS" |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH" |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
