Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 487-15, a Alliant Defense Electronics Systems item with the NSN 3020006706472 that is listed alongside the description “Gear Helical.” If you are interested in part number 487-15 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 487-15 is specifically listed with the NSN 3020-00-670-6472, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Alliant Defense Electronics Systems, this NSN part was specifically produced under CAGE Code 93712. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-670-6472 Item PartTypeName: GEAR,HELICAL | 3020 | 006706472 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 487-15 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 0.5424 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 17 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB,FIRST END |
| CQFM | HARDNESS RATING | 25.0 ROCKWELL C NOMINAL HUB |
| CQFM | HARDNESS RATING | 48.0 ROCKWELL C MINIMUM TEETH AND 52.0 ROCKWELL C MAXIMUM TEETH |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN TRANSVERSELY THROUGH HUB,FIRST END AND 2 THREADED TRANSVERSELY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.6040 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 11.6332 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.277 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.462 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.250 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.2503 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 0.420 INCHES BOTH ENDS |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.089 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,COND F MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
