Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 114596, a Allied Signal Inc item with the NSN 3040008701734 that is listed alongside the description “Bellcrank.” If you are interested in part number 114596 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 114596 is specifically listed with the NSN 3040-00-870-1734, and this code can be used to determine that it falls under FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, while tracing back to Allied Signal Inc, this NSN part was specifically produced under CAGE Code 72599. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-870-1734 Item PartTypeName: BELL CRANK | 3040 | 008701734 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 114596 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAWY | COUNTERBORE DIAMETER | 0.403 INCHES NOMINAL |
| AAWZ | COUNTERBORE DEPTH | 0.800 INCHES NOMINAL |
| CZLM | CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL | 1.930 INCHES NOMINAL 2ND END |
| CZLN | END HOLE/BALL DIAMETER | 0.190 INCHES MINIMUM 1ST END AND 0.195 INCHES MAXIMUM 1ST END |
| CZLN | END HOLE/BALL DIAMETER | 0.190 INCHES MINIMUM 2ND END AND 0.195 INCHES MAXIMUM 2ND END |
| STYL | STYLE DESIGNATOR | FLAT,RAISED FACE PIVOT HOLE,ONE OR MORE HOLES BOTH ARMS |
| ABXV | BORE DIAMETER | 0.351 INCHES NOMINAL |
| ADGE | BORE LENGTH | 1.600 INCHES NOMINAL |
| CZLM | CENTER TO CENTER DISTANCE BETWEEN FULCRUM AND ARM END HOLE/SLOT/BALL | 1.250 INCHES NOMINAL 1ST END |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
