Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 405391, a Allied Signal Inc item with the NSN 5315007414438 that is listed alongside the description “Pin Grooved Headless.” If you are interested in part number 405391 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 405391 is specifically listed with the NSN 5315-00-741-4438, and this code can be used to determine that it falls under FSC 5315 Nails Machine Keys and Pins. Additionally, while tracing back to Allied Signal Inc, this NSN part was specifically produced under CAGE Code 77068. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-741-4438 Item PartTypeName: PIN,GROOVED,HEADLESS | 5315 | 007414438 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 21899-1002-1 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMZ | DIAMETER | 0.3040 INCHES MINIMUM AND 0.3050 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 2.314 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.281 INCHES MINIMUM AND 0.285 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CSYM | SURFACE FINISH | 12.0 MICROINCHES SHANK END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-689 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR AN-QQ-S-690 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABHP | OVERALL LENGTH | 2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| ABPD | SECOND UNDERCUT WIDTH | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CRMG | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | 0.125 IN. DIA CENTER DRILLED BOTH ENDS |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | ZINC OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
