Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 5589164, a Am General Llc item with the NSN 2920014209968 that is listed alongside the description “Generator Engine Accessory.” If you are interested in part number 5589164 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 5589164 is specifically listed with the NSN 2920-01-420-9968, and this code can be used to determine that it falls under FSC 2920 Engine Electrical System Components Nonaircraft. Additionally, while tracing back to Am General Llc, this NSN part was specifically produced under CAGE Code 34623. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-01-420-9968 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 014209968 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Z | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5589164 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| ABRR | KEYWAY WIDTH | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM" |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND" |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED" |
| ADZC | ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT" |
| AFYS | KEYWAY LENGTH | 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM" |
| AGAV | END ITEM IDENTIFICATION | 2320-01-380-8604; WEAPON SYSTEM E/I TRUCK, VEHICLE SYSTEM, 1 1/4-TON (HMMWV)" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE" |
| AWDP | THREAD DIAMETER | 0.750 INCHES NOMINAL" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 200.0" |
| BCGN | GROUNDING METHOD | EXTERNAL" |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY" |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL" |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 170.0" |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.281 INCHES MINIMUM AND 7.332 INCHES MAXIMUM" |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.471 INCHES MINIMUM AND 8.548 INCHES MAXIMUM" |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES MINIMUM AND 0.469 INCHES MAXIMUM" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000" |
| BZRR | THREAD SERIES | UNF" |
| CFHL | THREAD CLASS | 3A" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC" |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16" |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| ELEC | VOLTAGE IN VOLTS | 28.0" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| ABRR | KEYWAY WIDTH | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM" |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND" |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED" |
| ADZC | ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT" |
| AFYS | KEYWAY LENGTH | 0.990 INCHES MINIMUM AND 1.000 INCHES MAXIMUM" |
| AGAV | END ITEM IDENTIFICATION | 2320-01-380-8604; WEAPON SYSTEM E/I TRUCK, VEHICLE SYSTEM, 1 1/4-TON (HMMWV)" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE" |
| AWDP | THREAD DIAMETER | 0.750 INCHES NOMINAL" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 200.0" |
| BCGN | GROUNDING METHOD | EXTERNAL" |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY" |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL" |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 5.200 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 170.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 170.0" |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.281 INCHES MINIMUM AND 7.332 INCHES MAXIMUM" |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.471 INCHES MINIMUM AND 8.548 INCHES MAXIMUM" |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES MINIMUM AND 0.469 INCHES MAXIMUM" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000" |
| BZRR | THREAD SERIES | UNF" |
| CFHL | THREAD CLASS | 3A" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC" |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16" |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| ELEC | VOLTAGE IN VOLTS | 28.0" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
