Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number M20708/14-02D, a Ametek Technical And Industrial Products Inc item with the NSN 5990013057228 that is listed alongside the description “Synchro Transmitter.” If you are interested in part number M20708/14-02D and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number M20708/14-02D is specifically listed with the NSN 5990-01-305-7228, and this code can be used to determine that it falls under FSC 5990 Synchros and Resolvers. Additionally, while tracing back to Ametek Technical And Industrial Products Inc, this NSN part was specifically produced under CAGE Code 14404. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-305-7228 Item PartTypeName: SYNCHRO,TRANSMITTER | 5990 | 013057228 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 904971 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.3320 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1867 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 15 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 85.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 1.2 WATTS MAXIMUM |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 1402.00 MINIMUM AND 1643.00 MAXIMUM |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 81.40 MINIMUM AND 84.60 MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 123.00 MINIMUM AND 138.00 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 26.50 MINIMUM AND 31.50 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 32.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.05 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| AJWH | SHAFT END PLAY | 0.0010 INCHES NOMINAL |
| AJWQ | PILOT LENGTH | 0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7770 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.0970 INCHES MINIMUM AND 1.1030 INCHES MAXIMUM |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOM. |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/14 GOVERNMENT SPECIFICATION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
