Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number PLT1092-8-10, a Arconic Global Fasteners And Rings item with the NSN 5320013438361 that is listed alongside the description “Rivet Blind.” If you are interested in part number PLT1092-8-10 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number PLT1092-8-10 is specifically listed with the NSN 5320-01-343-8361, and this code can be used to determine that it falls under FSC 5320 Rivets. Additionally, while tracing back to Arconic Global Fasteners And Rings, this NSN part was specifically produced under CAGE Code 5M902. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-01-343-8361 Item PartTypeName: RIVET,BLIND | 5320 | 013438361 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| PLT1092-8-10 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| SFTT | SURFACE TREATMENT | CADMIUM SLEEVE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| AAZF | SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| ANEE | GRIP LENGTH | 0.595 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES SLEEVE |
| AAZE | SHANK DIAMETER | 0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.3898 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | W/S:AIRCRAFT,HORNET F/A-18 |
| CBBL | FEATURES PROVIDED | SELF-LOCKING |
| MATT | MATERIAL | STEEL COMP 4130 NUT OR STEEL COMP 4140 NUT OR STEEL COMP 8740 NUT |
| ABAF | EXPANSION DEVICE | THREADED SLEEVE |
| ABAJ | LUBRICATION | WAX OR CETYL ALCOHOL OR SOLID FILM |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM BOLT AND 46.0 ROCKWELL C MAXIMUM BOLT |
| MATT | MATERIAL | STEEL COMP 4130 BOLT OR STEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE NUT OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE NUT OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| SFTT | SURFACE TREATMENT | CADMIUM BOLT AND CHROMATE BOLT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM NUT AND 46.0 ROCKWELL C MAXIMUM NUT |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| SFTT | SURFACE TREATMENT | CADMIUM NUT AND CHROMATE NUT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
