Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 5573627, a Army United States Department Of The item with the NSN 3040005573627 that is listed alongside the description “Worm Shaft.” If you are interested in part number 5573627 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 5573627 is specifically listed with the NSN 3040-00-557-3627, and this code can be used to determine that it falls under FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, while tracing back to Army United States Department Of The, this NSN part was specifically produced under CAGE Code 19204. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-557-3627 Item PartTypeName: WORM SHAFT | 3040 | 005573627 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1025-557-3627 | 5 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 18.000 INCHES NOMINAL |
| CFFB | WORM THREAD QUANTITY | 4 |
| CFFC | WORM THREAD LEAD | 0.750 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | LEFT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 20.000 |
| CFFG | WORM HELIX ANGLE | 4 DEGREES 58 MIN |
| CFFK | WORM OUTSIDE DIAMETER | 3.2274 INCHES NOMINAL |
| CFFN | WORM THREAD SECTION LENGTH | 3.120 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.134 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.750 INCHES NOMINAL FIRST END,FOURTH PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.750 INCHES NOMINAL FIRST END,THIRD PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.750 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.756 INCHES NOMINAL SECOND END,FOURTH PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.090 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.310 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 7.340 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.685 INCHES NOMINAL FIRST END,FOURTH PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.685 INCHES NOMINAL SECOND END,FOURTH PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.210 INCHES NOMINAL FIRST END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.210 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.248 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.248 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.120 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.120 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | 0.1400 INCHES NOMINAL FIRST END,FOURTH PORTION |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | 0.1400 INCHES NOMINAL SECOND END,FOURTH PORTION |
| FEAT | SPECIAL FEATURES | THIRD PORTION ON EACH SIDE IS HEXAGON SHAPED 1.061HEX;ROOT DIA. OF WORM 2.198 IN.DIA;PITCH DIA OF WORM 2.750 |
| MATT | MATERIAL | COPPER ALLOY OR IRON |
| SFTT | SURFACE TREATMENT | PHOSPHATE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
