Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 102665, a Astronautics Corporation item with the NSN 5340001343367 that is listed alongside the description “Bracket Angle.” If you are interested in part number 102665 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 102665 is specifically listed with the NSN 5340-00-134-3367, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Astronautics Corporation, this NSN part was specifically produced under CAGE Code 10138. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-134-3367 Item PartTypeName: BRACKET,ANGLE | 5340 | 001343367 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 102665 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM |
| AHLH | SECOND LEG END WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.051 INCHES MINIMUM AND 0.071 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.682 INCHES MINIMUM AND 0.692 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKBU | SECOND LEG STYLE | ANGLE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
