Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number BL92935, a At And T Corp item with the NSN 3020005170933 that is listed alongside the description “Gear Bevel.” If you are interested in part number BL92935 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number BL92935 is specifically listed with the NSN 3020-00-517-0933, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to At And T Corp, this NSN part was specifically produced under CAGE Code 70408. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-517-0933 Item PartTypeName: GEAR,BEVEL | 3020 | 005170933 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BL92935 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB,FIRST END |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 TRANSVERSELY THROUGH HUB,FIRST END |
| CQFM | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM HUB AND 30.0 ROCKWELL C MAXIMUM HUB |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.138 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.793 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.500 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 45.0000 DEGREES |
| CWQD | PITCH ANGLE | 14.5000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.156 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 0.500 INCHES SECOND END |
| MATT | MATERIAL | STEEL COMP 416 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE,BACK HUB PROTRUDING |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
