Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number B2139-240G, a B And B Motor And Control Corp item with the NSN 3010004769542 that is listed alongside the description “Gearcase Motor.” If you are interested in part number B2139-240G and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number B2139-240G is specifically listed with the NSN 3010-00-476-9542, and this code can be used to determine that it falls under FSC 3010 Torque Converters and Speed Changers. Additionally, while tracing back to B And B Motor And Control Corp, this NSN part was specifically produced under CAGE Code 27335. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-476-9542 Item PartTypeName: GEARCASE-MOTOR | 3010 | 004769542 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| B2139-240G | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 4.830 INCHES |
| AAJU | OVERALL LENGTH | 7.500 INCHES |
| AAJV | OVERALL WIDTH | 6.090 INCHES |
| ABWV | SHAFT DIAMETER | 0.499 INCHES MINIMUM SINGLE END AND 0.500 INCHES MAXIMUM SINGLE END |
| ABXQ | FLATTED PORTION LENGTH | 1.3800 INCHES NOMINAL SINGLE END |
| ACDC | CURRENT TYPE | AC INPUT |
| AGRB | FLAT DEPTH | 0.0200 INCHES NOMINAL SINGLE END |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | 40.0 INCH-POUNDS RUNNING |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | 0.0200 HORSEPOWER OUTPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.590 INCHES SINGLE END |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 1.550 INCHES SINGLE END |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.609 INCHES |
| CWDY | TEMP RATING | 40.0 AMBIENT DEG CELSIUS |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.500 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.140 SINGLE OUTPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 230.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 7.200 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| FAAZ | PHASE | THREE INPUT |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
