Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 971-1121, a Bae Systems Inc item with the NSN 3020006769776 that is listed alongside the description “Gear Spur.” If you are interested in part number 971-1121 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 971-1121 is specifically listed with the NSN 3020-00-676-9776, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Bae Systems Inc, this NSN part was specifically produced under CAGE Code 81413. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-676-9776 Item PartTypeName: GEAR,SPUR | 3020 | 006769776 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 971-1121 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | 1.0647 INCHES MINIMUM AND 1.0657 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 128 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.081 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.018 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.513 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.090 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 0.188 INCHES SECOND END |
| CWWH | END NOMINAL LENGTH | 0.281 INCHES FIRST END |
| CWWN | END NOMINAL DIAMETER | 0.125 INCHES FIRST END |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.232 INCHES FIRST END |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.313 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | SPLIT TYPE HUB |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 TEETH |
| MATT | MATERIAL | STEEL COMP 303SE BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COMP 303SE MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALLOY ALCLAD 2024,T4 FED SPEC ALL MATERIAL RESPONSES TEETH |
| SFTT | SURFACE TREATMENT | ANODIZE BODY |
| SFTT | SURFACE TREATMENT | PASSIVATE TEETH |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
