Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 212-040-500-4, a Bell Helicopter Textron Inc item with the NSN 3040004386323 that is listed alongside the description “Gearshaft Bevel.” If you are interested in part number 212-040-500-4 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 212-040-500-4 is specifically listed with the NSN 3040-00-438-6323, and this code can be used to determine that it falls under FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, while tracing back to Bell Helicopter Textron Inc, this NSN part was specifically produced under CAGE Code 97499. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-438-6323 Item PartTypeName: GEARSHAFT,BEVEL | 3040 | 004386323 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 212-040-500-004 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 4.438 INCHES MINIMUM AND 4.442 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 3.632 INCHES MINIMUM AND 3.642 INCHES MAXIMUM |
| AJLA | TEETH QUANTITY | 38 |
| AJWS | GEAR OUTSIDE DIAMETER | 4.457 INCHES MINIMUM AND 4.462 INCHES MAXIMUM |
| ANJS | SHAFT END TYPE | SPLINED STRAIGHT |
| AQGH | DIAMETRAL PITCH | 8.650 |
| AQPL | FACE WIDTH | 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CWMW | TEETH TYPE | SPIRAL |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 69.0000 DEGREES |
| CYEQ | SHAFT MATERIAL | STEEL COMP E9310 |
| CYER | GEAR MATERIAL | STEEL COMP E9310 |
| CYES | HARDNESS RATING AND LOCATION | 90.0 ROCKWELL SUPERFICIAL 15-N MINIMUM OVERALL AND 91.5 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL |
| CYET | SHAFT LARGEST DIAMETER | 1.869 INCHES MINIMUM AND 1.870 INCHES MAXIMUM |
| CYEU | GEAR LOCATION ON SHAFT | ON END OF SHAFT |
| CYEW | SHAFT END SIZE | 1.333 INCHES |
| FEAT | SPECIAL FEATURES | FLIGHT SAFETY CRITICAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
