Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 204 030 275 1, a Bell Helicopter Textron Inc item with the NSN 5340001343382 that is listed alongside the description “Bracket Angle.” If you are interested in part number 204 030 275 1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 204 030 275 1 is specifically listed with the NSN 5340-00-134-3382, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Bell Helicopter Textron Inc, this NSN part was specifically produced under CAGE Code 97499. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-134-3382 Item PartTypeName: BRACKET,ANGLE | 5340 | 001343382 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 204-030-275-1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.070 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 2.570 INCHES MINIMUM AND 2.630 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| AHLX | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 0.600 INCHES MINIMUM AND 0.720 INCHES MAXIMUM |
| AHLY | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 0.850 INCHES MINIMUM AND 0.970 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
