Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 205-040-131-1, a Bell Helicopter Textron Inc item with the NSN 5340009764629 that is listed alongside the description “Bracket Angle.” If you are interested in part number 205-040-131-1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 205-040-131-1 is specifically listed with the NSN 5340-00-976-4629, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Bell Helicopter Textron Inc, this NSN part was specifically produced under CAGE Code 97499. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-976-4629 Item PartTypeName: BRACKET,ANGLE | 5340 | 009764629 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 205-040-131-001 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 0.890 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AJFP | FIRST LEG END RADIUS | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AJFQ | SECOND LEG END RADIUS | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | END RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | END RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| HEAT | HEAT TREATMENT | T-3 SOLUTION HEAT TREATED |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
