Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number K3212-3, a Bliley Technologies Incorporated item with the NSN 5955013997272 that is listed alongside the description “Crystal Unit Quartz.” If you are interested in part number K3212-3 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number K3212-3 is specifically listed with the NSN 5955-01-399-7272, and this code can be used to determine that it falls under FSC 5955 Oscillators Piezoelectric Crystals. Additionally, while tracing back to Bliley Technologies Incorporated, this NSN part was specifically produced under CAGE Code 71034. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5955-01-399-7272 Item PartTypeName: CRYSTAL UNIT,QUARTZ | 5955 | 013997272 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | G | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9391503 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.220 INCHES MINIMUM AND 0.265 INCHES MAXIMUM" |
| ABJT | TERMINAL LENGTH | 0.500 INCHES MINIMUM AND 0.830 INCHES MAXIMUM" |
| ABMZ | DIAMETER | 0.310 INCHES MINIMUM AND 0.340 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 0.420 INCHES MAXIMUM" |
| AEBT | TERMINAL DIAMETER | 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM" |
| AEHC | III MODE OF OSCILLATION | THIRD OVERTONE" |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE" |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | 4.2 MINIMUM AND 5.0 MAXIMUM" |
| AEHG | SPECIFIED FREQUENCY | 93.100 MEGAHERTZ" |
| AEHS | HOLDER COVER MATERIAL | METAL" |
| AFGA | OPERATING TEMP RANGE | -55.0/+75.0 DEG CELSIUS" |
| AGAV | END ITEM IDENTIFICATION | F/A-18 RADAR, CAGE 76301" |
| CQBK | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 NOMINAL MILS AND 0.210 NOMINAL CENTIMETERS" |
| CQYL | DRIVE LEVEL RATING | 3.5 MILLIWATTS MINIMUM AND 4.5 MILLIWATTS MAXIMUM" |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.0001/+0.0001" |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | 60.0 NOMINAL" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| STYL | STYLE DESIGNATOR | HAT TYPE, 3 WIRE LEADS" |
| TEST | TEST DATA DOCUMENT | 82577-8000131 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| ZZZK | SPECIFICATION/STANDARD DATA | 82577-8000131-003T MANUFACTURERS SPECIFICATION CONTROL" |
| ABHP | OVERALL LENGTH | 0.220 INCHES MINIMUM AND 0.265 INCHES MAXIMUM" |
| ABJT | TERMINAL LENGTH | 0.500 INCHES MINIMUM AND 0.830 INCHES MAXIMUM" |
| ABMZ | DIAMETER | 0.310 INCHES MINIMUM AND 0.340 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 0.420 INCHES MAXIMUM" |
| AEBT | TERMINAL DIAMETER | 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM" |
| AEHC | III MODE OF OSCILLATION | THIRD OVERTONE" |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE" |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | 4.2 MINIMUM AND 5.0 MAXIMUM" |
| AEHG | SPECIFIED FREQUENCY | 93.100 MEGAHERTZ" |
| AEHS | HOLDER COVER MATERIAL | METAL" |
| AFGA | OPERATING TEMP RANGE | -55.0/+75.0 DEG CELSIUS" |
| AGAV | END ITEM IDENTIFICATION | F/A-18 RADAR, CAGE 76301" |
| CQBK | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 NOMINAL MILS AND 0.210 NOMINAL CENTIMETERS" |
| CQYL | DRIVE LEVEL RATING | 3.5 MILLIWATTS MINIMUM AND 4.5 MILLIWATTS MAXIMUM" |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.0001/+0.0001" |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | 60.0 NOMINAL" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| STYL | STYLE DESIGNATOR | HAT TYPE, 3 WIRE LEADS" |
| TEST | TEST DATA DOCUMENT | 82577-8000131 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| ZZZK | SPECIFICATION/STANDARD DATA | 82577-8000131-003T MANUFACTURERS SPECIFICATION CONTROL" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
