Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 3M1170D4-4AF, a Boeing Company The item with the NSN 5305014817843 that is listed alongside the description “Screw Close Tolerance.” If you are interested in part number 3M1170D4-4AF and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 3M1170D4-4AF is specifically listed with the NSN 5305-01-481-7843, and this code can be used to determine that it falls under FSC 5305 Screws. Additionally, while tracing back to Boeing Company The, this NSN part was specifically produced under CAGE Code 76301. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-481-7843 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 014817843 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1170D4-4AF | 3 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL" |
| AASB | FASTENER LENGTH | 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.3859 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM" |
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM" |
| AAWU | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH" |
| ABQJ | POINT STYLE | FLAT" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AGAV | END ITEM IDENTIFICATION | F18 E/F" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM" |
| CBBL | FEATURES PROVIDED | DRY FILM LUBRICANT" |
| CMLP | THREAD QUANTITY PER INCH | 28" |
| CQBC | MINIMUM TENSILE STRENGTH | 4400 POUNDS PER SQUARE INCH" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG REDUCED HEAD, GEAR DRIVE RECESS" |
| FEAT | SPECIAL FEATURES | CETYL ALCOHOL PER MIL-L-87132, TYPE I, GRADE B; CHAMFERED END - CHAMFER PLUS INCOMPLETE THREADS NOT TO EXCEED 2 THREAD PITCHES" |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629, PH13-8MO ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-83488, TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.425 INCHES NOMINAL" |
| AASB | FASTENER LENGTH | 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.3859 INCHES MINIMUM AND 0.3948 INCHES MAXIMUM" |
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM" |
| AAWU | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH" |
| ABQJ | POINT STYLE | FLAT" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AGAV | END ITEM IDENTIFICATION | F18 E/F" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM" |
| CBBL | FEATURES PROVIDED | DRY FILM LUBRICANT" |
| CMLP | THREAD QUANTITY PER INCH | 28" |
| CQBC | MINIMUM TENSILE STRENGTH | 4400 POUNDS PER SQUARE INCH" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEG REDUCED HEAD, GEAR DRIVE RECESS" |
| FEAT | SPECIAL FEATURES | CETYL ALCOHOL PER MIL-L-87132, TYPE I, GRADE B; CHAMFERED END - CHAMFER PLUS INCOMPLETE THREADS NOT TO EXCEED 2 THREAD PITCHES" |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629, PH13-8MO ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-83488, TYPE II, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
