Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 75A500803-2003, a Boeing Company The item with the NSN 5340011932743 that is listed alongside the description “Clamp Block Section.” If you are interested in part number 75A500803-2003 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 75A500803-2003 is specifically listed with the NSN 5340-01-193-2743, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Boeing Company The, this NSN part was specifically produced under CAGE Code 76301. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5340-01-193-2743 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 011932743 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
75A500803-2003 | 5 | 1 | C | 9 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 4.300 INCHES NOMINAL |
ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
ABTB | MOUNTING HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
ABTJ | MOUNTING HOLE QUANTITY | 2 |
AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.250 INCHES NOMINAL |
AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 3.148 INCHES MINIMUM AND 3.152 INCHES MAXIMUM |
AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
BYGG | BLOCK HEIGHT | 0.700 INCHES NOMINAL |
CWTD | CLAMPING HOLE QUANTITY | 3 |
CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM FIRST HOLE AND 0.254 INCHES MAXIMUM FIRST HOLE |
CWWM | CLAMPING HOLE DIAMETER | 0.500 INCHES MINIMUM SECOND HOLE AND 0.504 INCHES MAXIMUM SECOND HOLE |
CWWM | CLAMPING HOLE DIAMETER | 0.750 INCHES MINIMUM THIRD HOLE AND 0.754 INCHES MAXIMUM THIRD HOLE |
CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.890 INCHES NOMINAL |
CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.418 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.238 INCHES MINIMUM AND 1.242 INCHES MAXIMUM |
CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.880 INCHES NOMINAL |
MATT | MATERIAL | PLASTIC |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote