Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 9D0006-10D, a Boeing Company The item with the NSN 5340014539863 that is listed alongside the description “Bracket Angle.” If you are interested in part number 9D0006-10D and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 9D0006-10D is specifically listed with the NSN 5340-01-453-9863, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Boeing Company The, this NSN part was specifically produced under CAGE Code 88277. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-453-9863 Item PartTypeName: BRACKET,ANGLE | 5340 | 014539863 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9D0006-10D | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHLP | Second Leg Distance Between Hole Centers Along Width | 0.3800 INCHES NOMINAL |
| ADLL | Second Leg Length | 1.9400 INCHES NOMINAL |
| AHLN | Second Leg Hole Diameter | 0.0980 INCHES NOMINAL |
| AHLX | Second Leg Distance Between First And Second Hole Centers Along Length | 0.1900 INCHES NOMINAL |
| AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.2500 INCHES NOMINAL |
| AHQP | First Leg Corner Radius | 0.1200 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| AHQN | First Leg Width | 0.8000 INCHES NOMINAL |
| CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
| SFTT | Surface Treatment | CHROMATE |
| AJZU | First Leg Style | CORNER RADIUS |
| ACHY | Mounting Hole Type | PLAIN |
| AKCU | Second Leg Hole Arrangement Style | FOUR HOLES |
| MATT | Material | ALUMINUM ALLOY 2024 |
| AHLG | Second Leg Corner Radius | 0.2500 INCHES NOMINAL |
| AHLU | Second Leg Distance Between Second And Third Hole Centers Along Width | 0.1900 INCHES NOMINAL |
| AHPW | First Leg Thickness | 0.0500 INCHES NOMINAL |
| AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.4000 INCHES NOMINAL |
| AKBU | Second Leg Style | CORNER RADIUS |
| AKAU | First Leg Hole Arrangement Style | ONE HOLE |
| MDCL | Material Document And Classification | QQ-A-Q225/5 FED SPEC SINGLE MATERIAL RESPONSE |
| ADLK | First Leg Length | 1.4000 INCHES NOMINAL |
| AHLF | Second Leg Width | 0.8000 INCHES NOMINAL |
| AHLT | Second Leg Distance Between First And Second Hole Centers Along Width | 0.1900 INCHES NOMINAL |
| AHLY | Second Leg Distance Between Second And Third Hole Centers Along Length | 0.1900 INCHES NOMINAL |
| AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.4000 INCHES NOMINAL |
| STYL | Style Designator | ANGLE |
| AHLK | First Leg Hole Diameter | 0.2460 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM |
| CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
| AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.2100 INCHES NOMINAL |
| STDC | Surface Treatment Document And Classification | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHPX | Second Leg Thickness | 0.0500 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
