Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 2001092302, a Bourns Instruments Inc item with the NSN 5905000899527 that is listed alongside the description “Resistor Variable Wire Wound Pre.” If you are interested in part number 2001092302 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 2001092302 is specifically listed with the NSN 5905-00-089-9527, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Bourns Instruments Inc, this NSN part was specifically produced under CAGE Code 80294. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-089-9527 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 000899527 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2001092302 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | RECTANGULAR W/TAB/FLANGE MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AASA | THREAD LENGTH | 0.900 INCHES MINIMUM |
| ABHP | OVERALL LENGTH | 11.580 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.000 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.201 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.188 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 4.830 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 6.110 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.950 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 1.930 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.201 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,THREADED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.440 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 5.550 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 12.5 KILOHMS ALL SECTIONS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/0.50 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR ALL SECTIONS |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 ALL SECTIONS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 6250.0 ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 125.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 80378-215-48103-5 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
