Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 5030166, a Bourns Instruments Inc item with the NSN 5905013242303 that is listed alongside the description “Resistor Variable Nonwire Wound.” If you are interested in part number 5030166 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 5030166 is specifically listed with the NSN 5905-01-324-2303, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Bourns Instruments Inc, this NSN part was specifically produced under CAGE Code 32997. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-324-2303 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 013242303 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5030166 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABPM | BODY DIAMETER | 0.859 NOMINAL MILS AND 0.891 NOMINAL CENTIMETERS |
| ABXF | SHAFT LENGTH | 0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/100.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB,SOLDER LUG |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFL | MAXIMUM RUNNING TORQUE | 10.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 96.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGA | LATERAL RUNOUT | 0.005 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.003 INCHES |
| AGAV | END ITEM IDENTIFICATION | 6660-01-148-1772 METEOROLOGICAL DATA |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | UPPER ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/0.25 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 7TH SECONDARY QUALITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| TEST | TEST DATA DOCUMENT | 57946-5030166 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| ADAP | MOUNTING BUSHING LENGTH | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 10.00 INCH-OUNCES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT,RATED AMPERES C AND BETTER FLOORING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 3610.0 MAXIMUM |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
