Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 960902-19, a Bunker Ramo Corp item with the NSN 5905005461354 that is listed alongside the description “Resistor Variable Wire Wound Non.” If you are interested in part number 960902-19 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 960902-19 is specifically listed with the NSN 5905-00-546-1354, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Bunker Ramo Corp, this NSN part was specifically produced under CAGE Code 12205. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-546-1354 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 005461354 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | ||||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
960902-19 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 6 |
AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
AAVL | PILOT DIAMETER | 1.8740 INCHES MINIMUM |
AAVM | PILOT LENGTH | 0.0670 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 0.0620 INCHES MINIMUM |
ABPM | BODY DIAMETER | 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM |
ABUF | ANGLE OF MOUNTING HOLE IN DEG | 20.0 |
ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
ABXF | SHAFT LENGTH | 0.605 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
ADAQ | BODY LENGTH | 4.026 INCHES MINIMUM AND 4.106 INCHES MAXIMUM |
AECZ | MOUNTING LIP DIAMETER | 1.9840 INCHES MINIMUM |
AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
AEDX | SHAFT STYLE | ROUND |
AEDZ | SHAFT BEARING TYPE | BALL |
AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 357.0 NOMINAL |
AEFK | MAXIMUM STARTING TORQUE | 7.00 INCH-OUNCES |
AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
AEFY | SHAFT END PLAY | 0.00500 INCHES |
AEFZ | SHAFT RUNOUT | 0.002 INCHES |
AEGA | LATERAL RUNOUT | 0.002 INCHES |
AEGB | PILOT DIAMETER RUNOUT | 0.00150 INCHES |
AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
AKPV | MOUNTING FACILITY QUANTITY | 3 |
APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
AXGY | MOUNTING METHOD | THREADED HOLE |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS 5TH SECTION |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 1ST SECTION |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 2ND SECTION |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 3RD SECTION |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 4TH SECTION |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 6TH SECTION |
CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -160.0 TO 160.0 1ST SECTION |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -160.0 TO 160.0 2ND SECTION |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -160.0 TO 160.0 4TH SECTION |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -40.0 TO 40.0 3RD SECTION |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -40.0 TO 40.0 6TH SECTION |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -40.0/40.0 5TH SECTION |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/1.0 3RD SECTION |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/1.0 6TH SECTION |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0/2.0 5TH SECTION |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 2ND SECTION |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 4TH SECTION |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 1ST SECTION |
CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 3450.0 ALL SECTIONS |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
TTQY | TERMINAL TYPE AND QUANTITY | 18 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote