Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1619888-2, a Carleton Life Support Technologies item with the NSN 5340012112767 that is listed alongside the description “Bracket Angle.” If you are interested in part number 1619888-2 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1619888-2 is specifically listed with the NSN 5340-01-211-2767, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Carleton Life Support Technologies, this NSN part was specifically produced under CAGE Code 99251. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-211-2767 Item PartTypeName: BRACKET,ANGLE | 5340 | 012112767 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1619888-2 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.875 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 0.912 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 0.375 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.095 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.420 INCHES NOMINAL |
| AHLZ | SECOND LEG SLOT LENGTH | 0.234 INCHES NOMINAL |
| AHMA | SECOND LEG SLOT WIDTH | 0.156 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.375 INCHES NOMINAL |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.312 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.110 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,COND 1/4 HARD MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
