Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 222790, a Clark Material Handling Company item with the NSN 3020008481452 that is listed alongside the description “Gear Spur.” If you are interested in part number 222790 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 222790 is specifically listed with the NSN 3020-00-848-1452, and this code can be used to determine that it falls under FSC 3020 Gear Pulley Sprocket and Transmission Chain. Additionally, while tracing back to Clark Material Handling Company, this NSN part was specifically produced under CAGE Code 89749. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-848-1452 Item PartTypeName: GEAR,SPUR | 3020 | 008481452 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 222790 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,SOLID |
| AJLA | TEETH QUANTITY | 39 |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES SECOND END |
| CWRS | BORE NOMINAL DIAMETER | 3.837 INCHES BOTH ENDS |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.454 INCHES FIRST END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 4.557 INCHES FIRST END |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.200 INCHES FIRST END |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
| ABSA | SPLINE QUANTITY | 22 BOTH ENDS |
| AGJS | PITCH DIAMETER | 7.7150 INCHES NOMINAL |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 3.6667 INCHES NOMINAL BOTH ENDS |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.996 INCHES |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.250 INCHES |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 4.557 INCHES SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 5.000 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | COUNTERBORE 1ST END,4.125 IN. DIA. BY 0.453 IN. DEEP |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
