Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number WH04599, a Cts Inc item with the NSN 5905011191395 that is listed alongside the description “Resistor Variable Nonwire Wound.” If you are interested in part number WH04599 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number WH04599 is specifically listed with the NSN 5905-01-119-1395, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Cts Inc, this NSN part was specifically produced under CAGE Code 55578. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-119-1395 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 011191395 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 15774-201 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 3.224 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.125 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.750 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 1.812 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.209 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.030 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 115.0 AND 28.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 280.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 3.25 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.25 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 80.00 INCH-OUNCES |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGQL | UNDERCUT LENGTH | 0.437 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ARNH | OPERATING POSITION | START OF ROTATION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 15.0 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 ALL SECTIONS |
| CQTM | TERMINAL LOCATION | REAR-BOTTOM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC/DC |
| FEAT | SPECIAL FEATURES | WHITE STOP PLATES MADE OF CELENIX 3310 |
| TEST | TEST DATA DOCUMENT | 10138-15774 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWIN |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
