Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 18731, a Dana Commercial Vehicle Products item with the NSN 2520006543427 that is listed alongside the description “Shaft Axle Automotive.” If you are interested in part number 18731 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 18731 is specifically listed with the NSN 2520-00-654-3427, and this code can be used to determine that it falls under FSC 2520 Vehicle Power Transmission Components. Additionally, while tracing back to Dana Commercial Vehicle Products, this NSN part was specifically produced under CAGE Code 72447. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
2520-00-654-3427 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 006543427 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
805336 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 30.688 INCHES NOMINAL |
ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
AETC | METALLIC HARDNESS RATING | 42.0 MINIMUM ROCKWELL C AND 48.0 MAXIMUM ROCKWELL C |
AGGP | DRILLED HOLE DIAMETER | 0.172 INCHES NOMINAL |
AMCP | FIRST END TAPER | 1.000 INCHES NOMINAL PER FOOT |
AMCR | FIRST END TAPER MAJOR DIAMETER | 1.625 INCHES NOMINAL |
AMCZ | FIRST END KEYWAY WIDTH | 0.438 INCHES NOMINAL |
AMDG | FIRST END KEYWAY DEPTH | 0.137 INCHES NOMINAL |
AMGA | SECOND END SPLINE LENGTH | 1.500 INCHES NOMINAL |
AMGF | SECOND END PITCH DIAMETER | 0.500 INCHES NOMINAL |
AMQA | FIRST END TYPE | TAPERED |
AMQF | SECOND END TYPE | SPLINED |
AQSQ | FIRST END THREAD SIZE | 1-14 |
ASXK | HOLE QUANTITY | 1 |
ATKT | FIRST END THREAD SERIES | UNF |
BBCF | SECOND END SPLINE QUANTITY | 20 |
BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
BNTM | SECOND END SPLINE TYPE | INVOLUTE |
BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
BNTX | END HOLE TYPE | DRILLED |
BNYZ | FIRST END PIN HOLE DIAMETER | 0.172 INCHES NOMINAL |
FEAT | SPECIAL FEATURES | CIRCULAR TOOTH THICKNESS 0.0972 ON 1.250 PITCH DIA ALLOWABLE BACKLASH OF SPLINE TOOTH WITH MATING PART 0.0001 TO 0.004 |
MATT | MATERIAL | STEEL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1033 TO 1035 ASSN STD SINGLE MATERIAL RESPONSE |
ZZZV | FSC APPLICATION DATA | TRAILER AIR CONDITIONER,TYPE MA-8 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote