Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 106087, a Dana Off Highway Products Llc item with the NSN 2520009124520 that is listed alongside the description “Shaft Axle Automotive.” If you are interested in part number 106087 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 106087 is specifically listed with the NSN 2520-00-912-4520, and this code can be used to determine that it falls under FSC 2520 Vehicle Power Transmission Components. Additionally, while tracing back to Dana Off Highway Products Llc, this NSN part was specifically produced under CAGE Code 77237. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-912-4520 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 009124520 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 106087 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 37.750 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 363.0 MAXIMUM BRINELL STANDARD |
| AMDM | FIRST END SPLINE LENGTH | 2.562 INCHES NOMINAL |
| AMDS | FIRST END PITCH DIAMETER | 1.860 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 2.562 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 1.860 INCHES NOMINAL |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 16 |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNPJ | FIRST END FACILITY DIAMETER | 1.812 INCHES NOMINAL |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTC | FIRST END FACILITY WIDTH | 0.109 INCHES NOMINAL |
| BNTD | FIRST END FACILITY LOCATION | 0.166 IN.MIN TO 0.176 IN.MAX LG FROM SHAFT END |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 20.0 |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYX | FIRST END SPLINE TYPE | INVOLUTE |
| BNYY | FIRST END SPLINE PRESSURE ANGLE IN DEG | 20.0 |
| MATT | MATERIAL | STEEL COMP 4145H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4145H ASSN STD SINGLE MATERIAL RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
