Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 209641, a Dana Off Highway Products Llc item with the NSN 3040009798761 that is listed alongside the description “Shaft Straight.” If you are interested in part number 209641 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 209641 is specifically listed with the NSN 3040-00-979-8761, and this code can be used to determine that it falls under FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, while tracing back to Dana Off Highway Products Llc, this NSN part was specifically produced under CAGE Code 77237. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-979-8761 Item Description: SHAFT,STRAIGHT | 3040 | 009798761 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 209641 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | TONGUE AND CROSS DRILLED HOLE |
| ABHP | OVERALL LENGTH | 10.125 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.7395 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
| AMDX | FIRST END HOLE DIAMETER | 0.3440 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.935 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| AMEB | FIRST END HOLE DEPTH | 0.375 INCHES NOMINAL |
| AMFX | SECOND END TONGUE THICKNESS | 0.406 INCHES NOMINAL |
| AMFY | SECOND END TONGUE WIDTH | 0.739 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.7395 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
| AMGS | SECOND END HOLE DIAMETER | 0.3750 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 0.406 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 20.0 MICROINCHES |
| CTBM | SECOND END STEP LENGTH | 0.875 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SHAFT HAS TWO NOTCHES,0.190 IN. R W/FLAT BETWEEN NOTCHES,0.059 IN. DEEP |
| MATT | MATERIAL | MANGANESE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
