Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 28-390, a Delta Intl Machinery Corp item with the NSN 3405004090063 that is listed alongside the description “Saw Band Metal Cutting.” If you are interested in part number 28-390 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 28-390 is specifically listed with the NSN 3405-00-409-0063, and this code can be used to determine that it falls under FSC 3405 Saws and Filing Machines. Additionally, while tracing back to Delta Intl Machinery Corp, this NSN part was specifically produced under CAGE Code 83738. With our services and dedication to simple procurement in mind, get started with us today!
| MRC | Criteria | Characteristic |
|---|---|---|
| AMSE | Voltage Rating | 115.0 VOLTS NOMINAL |
| FAAZ | Phase | SINGLE |
| AMZE | Rotational Speed Rating In Rpm | 1725 |
| ACDC | Current Type | AC |
| ANCY | Horsepower Rating | 0.75 |
| AWLX | Electric Motor Quantity | 1 |
| ACZB | Frequency Rating | 60.0 HERTZ NOMINAL |
| BWMG | Blade Maximum Length Accommodated | 94.000 INCHES |
| BWNB | Cutting Speed Quantity | 8 |
| BNBB | Table Type | TILTING |
| AAXX | Mounting Type | FLOOR |
| AKYD | Accessory Components And Quantity | FENCE,RIP,18 IN.,1;BELT ATTACHMENT,SANDING ABRASIVE,1;WELDER AND GRINDER,BUTT,1;LAMP ATTACHMENT,1;SLIDING,STRAIGHT AND ANGLE CUT-OFF,1;LAMP ATTACHMENT,SLIDING JIG,1;SPARE DRIVE BELT SET,1;BLADE,SKIP TOOTH,100 FT.COIL,ALUMINUM AND PLASTIC CUTTING,1;RAKER SET,FLEXIBLE BACK,CONVENTIONAL TOOTH,1/2 IN.WIDE,14 TOOTH,100 FT.COIL,1;BLADE,1/2 IN.WIDE,24 TOOTH,PIPE AND CHANNEL CUTTING,100 FT.COIL,1;BELT,SANDING,COARSE GRIT,3;BELT,SANDING,MEDIUM GRIT,3 |
| AQLX | Braking Facility | NOT INCLUDED |
| ALDF | Frame Type | RIGID |
| ARCM | Drive Method | ELECTRIC MOTOR |
| ARDQ | Table Length | 14.000 INCHES NOMINAL |
| ARDR | Table Width | 14.000 INCHES NOMINAL |
| BWMC | Band Type For Which Designed | SAW BLADE |
| BWMH | Blade Maximum Width Accommodated | 0.750 INCHES |
| BWMZ | Cutting Speed Range | +40.0/+3000.0 FEET PER MINUTE |
| BWND | Power Feed Feature | NOT PROVIDED |
| BWNJ | Integral Grinder | NOT INCLUDED |
| BWLY | Table Right Tilt Angle In Deg | 45 |
| BWLZ | Table Left Tilt Angle In Deg | 10 |
| BWML | Vise | NOT PROVIDED |
| BWMN | Distance Between Guide And Table | 6.250 INCHES NOMINAL |
| BWNG | Built-In Coolant System | NOT INCLUDED |
| BWNH | Integral Butt Welder | NOT INCLUDED |
| ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY THE DRIVE METHOD,ELECTRIC MOTOR REQUIREMENTS AND ACCESSORY COMPONENTS REQUIREMENT |
| MRC | Decoded Requirement | Clear Text Reply |
| AQCL | Throat Depth | 13.750 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
