Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number G50615, a Dempster Industries Inc item with the NSN 4720006514507 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number G50615 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number G50615 is specifically listed with the NSN 4720-00-651-4507, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Dempster Industries Inc, this NSN part was specifically produced under CAGE Code 16935. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-651-4507 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 006514507 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LL148-20 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.969 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| AHNC | CONNECTION STYLE | INVERTED FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CQBD | BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED |
| CQGM | MAXIMUM OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| CQRB | SEAT ANGLE | 30.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 20.000 INCHES NOMINAL OVERALL |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPTF 1ST END |
| ZZZK | SPECIFICATION/STANDARD DATA | SAE J517,100R2,TYPE A NATIONAL STD/SPEC |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
