Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number BB5111, a Diamond Reo Trucks Inc item with the NSN 2520004957706 that is listed alongside the description “Shaft Axle Automotive.” If you are interested in part number BB5111 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number BB5111 is specifically listed with the NSN 2520-00-495-7706, and this code can be used to determine that it falls under FSC 2520 Vehicle Power Transmission Components. Additionally, while tracing back to Diamond Reo Trucks Inc, this NSN part was specifically produced under CAGE Code 56442. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-495-7706 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 004957706 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 364937 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZQ | HOLE DEPTH | 0.531 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 30.688 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 35.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C |
| AGGP | DRILLED HOLE DIAMETER | 0.982 INCHES MINIMUM AND 0.985 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 2.750 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.600 INCHES MINIMUM AND 1.608 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.859 INCHES MINIMUM AND 1.861 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 2.9062 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 1.879 INCHES NOMINAL |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| ASXK | HOLE QUANTITY | 1 |
| BBCD | FIRST END SPLINE QUANTITY | 16 |
| BBCF | SECOND END SPLINE QUANTITY | 12 |
| BNPK | SECOND END FACILITY DIAMETER | 1.655 INCHES MINIMUM AND 1.655 INCHES MAXIMUM |
| BNTC | FIRST END FACILITY WIDTH | 0.151 INCHES MINIMUM |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 29.0 |
| BNTQ | SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTR | SECOND END FACILITY WIDTH | 0.154 INCHES MAXIMUM |
| BNTS | SECOND END FACILITY LOCATION | 2.413 IN. FROM SHAFT END |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNTX | END HOLE TYPE | DRILLED |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| MATT | MATERIAL | STEEL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
