Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number CS-2300-0001, a Dla Land And Maritime item with the NSN 5340001778114 that is listed alongside the description “Bracket Angle.” If you are interested in part number CS-2300-0001 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number CS-2300-0001 is specifically listed with the NSN 5340-00-177-8114, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Dla Land And Maritime, this NSN part was specifically produced under CAGE Code 16236. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-177-8114 Item PartTypeName: BRACKET,ANGLE | 5340 | 001778114 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CS-2300-0001 | 2 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.700 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 1.770 INCHES MINIMUM AND 1.790 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 1.500 NOMINAL INCHES |
| AHLK | FIRST LEG HOLE DIAMETER | 0.219 NOMINAL INCHES |
| AHLN | SECOND LEG HOLE DIAMETER | 0.281 NOMINAL INCHES |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 NOMINAL INCHES |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.500 INCHES NOMINAL |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AJFQ | SECOND LEG END RADIUS | 0.380 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | END RADIUS AND TAPERED |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
