Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 702059C91, a Dressta North America Ltd item with the NSN 4720001364501 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number 702059C91 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 702059C91 is specifically listed with the NSN 4720-00-136-4501, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Dressta North America Ltd, this NSN part was specifically produced under CAGE Code 45RP7. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-136-4501 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 001364501 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 702059C91 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3A 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| AHNC | CONNECTION STYLE | INVERTED FLARE 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD AND 1ST LAYER BRAIDED COTTON CORD |
| CQGM | MAXIMUM OPERATING PRESSURE | 625.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.125 INCHES 2ND END |
| CQJX | NOMINAL THREAD SIZE | 1.250 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 43.000 INCHES NOMINAL OVERALL |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID,WATER BASE AND FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
