Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number KYN182-1, a Drs Consolidated Controls Inc item with the NSN 5930012451464 that is listed alongside the description “Switch Rotary.” If you are interested in part number KYN182-1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number KYN182-1 is specifically listed with the NSN 5930-01-245-1464, and this code can be used to determine that it falls under FSC 5930 Switches. Additionally, while tracing back to Drs Consolidated Controls Inc, this NSN part was specifically produced under CAGE Code 06RP6. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-01-245-1464 Item PartTypeName: SWITCH,ROTARY | 5930 | 012451464 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| KYN182-1 | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.437 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| ABHP | OVERALL LENGTH | 3.879 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| ABNC | FLAT HEIGHT | 0.219 INCHES NOMINAL SINGLE ACTUATOR |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE ACTUATOR |
| ABXF | SHAFT LENGTH | 0.437 INCHES NOMINAL SINGLE ACTUATOR |
| ADAV | OVERALL DIAMETER | 1.284 INCHES NOMINAL |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 3:00 OCLOCK |
| AFBH | INDIVIDUAL SECTION QUANTITY | 6 |
| AFDC | NONTURN DEVICE TYPE | TAB AT 3:00 OCLOCK |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 4 EACH SECTION FRONT |
| AKPY | THROW QUANTITY | 3 EACH SECTION REAR |
| AXGY | MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 0.03 AC AT SEA LEVEL |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 0.03 DC AT SEA LEVEL |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 4 EACH SECTION |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND,FLATTED SINGLE ACTUATOR |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| CSCF | TERMINAL TYPE | CONNECTOR,PLUG |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 4TH SECTION REAR |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 5TH SECTION REAR |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES 6TH SECTION REAR |
| CSHW | CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS 1ST SECTION REAR |
| CSHW | CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS 2ND SECTION REAR |
| CSHW | CONTACT SWITCHING ACTION | MAKES BEFORE BREAKS 3RD SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 10.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CTHF | CONTACT LOAD CURRENT RATING | 10.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO3547 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| STYL | STYLE DESIGNATOR | TAP,CIRCULAR,BUSHING MOUNT |
| THSD | THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
