Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 70B01056, a Drs Training And Control Systems Llc item with the NSN 5340001465363 that is listed alongside the description “Bracket Double Angle.” If you are interested in part number 70B01056 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 70B01056 is specifically listed with the NSN 5340-00-146-5363, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Drs Training And Control Systems Llc, this NSN part was specifically produced under CAGE Code 12339. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-146-5363 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 001465363 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 70B01056 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD | MACHINED |
| ADLK | FIRST LEG LENGTH | 2.375 INCHES NOMINAL |
| ADLL | SECOND LEG LENGTH | 4.000 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.250 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.266 INCHES NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 0.438 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| AHPZ | CENTER SECTION HEIGHT | 4.625 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 1.250 INCHES NOMINAL |
| AHQB | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 1.250 INCHES NOMINAL |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.000 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.625 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.625 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | GLOSS YELLOW COLOR |
| HEAT | HEAT TREATMENT | H-32 STRAIN HARDENED |
| MATT | MATERIAL | ALUMINUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | OXIDE FILM OR PAINT OR PRIMER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OR TT-P-1757 FED SPEC 2ND TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
