Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1007119, a Ducommun Labarge Technologies Inc item with the NSN 5340013558827 that is listed alongside the description “Bracket Double Angle.” If you are interested in part number 1007119 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1007119 is specifically listed with the NSN 5340-01-355-8827, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Ducommun Labarge Technologies Inc, this NSN part was specifically produced under CAGE Code 08719. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-355-8827 Item PartTypeName: BRACKET,DOUBLE ANGLE | 5340 | 013558827 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1007119 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | 0.750 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| AHQB | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 0.136 INCHES NOMINAL |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.312 NOMINAL INCHES |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.875 INCHES NOMINAL |
| AKBU | SECOND LEG STYLE | SQUARE |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
| ADLL | SECOND LEG LENGTH | 1.250 INCHES NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 0.157 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.283 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 2.440 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.283 INCHES NOMINAL |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FEAT | SPECIAL FEATURES | CENTER SECTION HAS A RECTANGULAR APERTURE 0.562 IN. H. BY 1.062 IN. W. WITH ROUNDED CORNERS AND TWO ADJACENT MTG HOLES. |
| SFTT | SURFACE TREATMENT | CHROMATE |
| AHLF | SECOND LEG WIDTH | 2.440 INCHES NOMINAL |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.875 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.290 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| AHPZ | CENTER SECTION HEIGHT | 1.750 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 2.440 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
