Request a Quote for MW22-10-30K E T I Systems Inc Part With the NSN 5905-01-228-7786 Today

Part Number: MW22-10-30K

Alternate P/N: MW221030K

Manufacturer: E T I Systems Inc

NSN: 5905-01-228-7786

NIIN: 012287786

Item Name : Resistor Variable Wire Wound Pre

CAGE Code: 19477

FSC: 5905 Resistors

FSG: 59 Electrical and Electronic Equipment Components

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MW22-10-30K, a E T I Systems Inc item with the NSN 5905012287786 that is listed alongside the description “Resistor Variable Wire Wound Pre.” If you are interested in part number MW22-10-30K and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MW22-10-30K is specifically listed with the NSN 5905-01-228-7786, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to E T I Systems Inc, this NSN part was specifically produced under CAGE Code 19477. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number MW22-10-30K with NSN 5905-01-228-7786, 5905012287786

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-228-7786 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE	5905	012287786	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			G	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
499-033-024	5	2	5

Characteristics Data of NSN 5905-01-228-7786, 5905012287786

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	1
AAQL	BODY STYLE	CYLINDRICAL BUSHING MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
ABPM	BODY DIAMETER	0.875 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.781 INCHES MINIMUM AND 0.844 INCHES MAXIMUM
ADAP	MOUNTING BUSHING LENGTH	0.313 INCHES NOMINAL
ADAQ	BODY LENGTH	0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND,SLOTTED
AEDZ	SHAFT BEARING TYPE	SLEEVE
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	3600.0 MINIMUM AND 3610.0 MAXIMUM
AEFK	MAXIMUM STARTING TORQUE	0.60 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	0.60 INCH-OUNCES
AEFM	MAXIMUM STOP TORQUE	96.00 INCH-OUNCES
AEFN	NONTURN DEVICE LOCATION	AT 730 OCLOCK
AEFP	NONTURN DEVICE RADIUS	0.290 INCHES NOMINAL
AEFY	SHAFT END PLAY	0.005 INCHES
AEFZ	SHAFT RUNOUT	0.002 INCHES
AEGA	LATERAL RUNOUT	0.005 INCHES
AEGB	PILOT DIAMETER RUNOUT	0.002 INCHES
AEGC	SHAFT RADIAL PLAY	0.003 INCHES
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJYN	SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
AJYP	SCREW THREAD SERIES DESIGNATOR	UNEF
AJYQ	SCREW THREAD QUANTITY PER INCH	32.0
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	STANDARD BUSHING
CBBL	FEATURES PROVIDED	HUMIDITY PROOF
CBME	CUBIC MEASURE	0.633 CUBIC INCHES
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	3600.0 MINIMUM AND 3610.0 MAXIMUM
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.20 TO 0.20 SINGLE SECTION
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-20.0 TO 20.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-3.0 TO 3.0 SINGLE SECTION
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	STOPS
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
PMLC	PRECIOUS MATERIAL AND LOCATION	TERMINAL SURFACES GOLD
PRMT	PRECIOUS MATERIAL	GOLD
TTQY	TERMINAL TYPE AND QUANTITY	3 TAB,SOLDER LUG