Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 399863, a Eaton Aerospace Ltd item with the NSN 1650004920722 that is listed alongside the description “Motor Hydraulic.” If you are interested in part number 399863 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 399863 is specifically listed with the NSN 1650-00-492-0722, and this code can be used to determine that it falls under FSC 1650 Aircraft Hydraulic Vacuum and De icing System Components. Additionally, while tracing back to Eaton Aerospace Ltd, this NSN part was specifically produced under CAGE Code 62983. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1650-00-492-0722 Item Description: Motor Hydraulic | 1650 | 004920722 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 399863 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | 81.0 INCH-POUNDS |
| AAUH | SPLINE MINOR DIAMETER | 0.353 INCHES MINIMUM AND 0.356 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.406 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 12 |
| ABTB | MOUNTING HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 0.437-20 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 2900.0 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | 3.000 INCHES NOMINAL |
| AGJS | PITCH DIAMETER | 0.375 INCHES NOMINAL |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| AJLF | HOUSING MATERIAL | STEEL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNJF |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| APJC | THREAD LOCATION | INTERNAL |
| ASAP | SPLINE PITCH | 32/64 |
| ASMM | CONNECTION QUANTITY | 2 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | 0.350 INCHES NOMINAL |
| AXFP | III DISPLACEMENT TYPE | CONSTANT |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | MS33649-4 |
| AZFG | MOUNTING BOLT HOLE SPACING | 2.100 IN. BY 2.100 IN. |
| ZZZV | III FSC APPLICATION DATA | HYDRAULIC SYSTEM,MOTOR GEAR ASSEMBLY,WING FOLD,ACFT |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY A SOURCE CONTROLLED DRAWING |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
