Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 323913, a Eaton Aerospace Ltd item with the NSN 3040015213107 that is listed alongside the description “Shaft Shouldered.” If you are interested in part number 323913 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 323913 is specifically listed with the NSN 3040-01-521-3107, and this code can be used to determine that it falls under FSC 3040 Miscellaneous Power Transmission Equipment. Additionally, while tracing back to Eaton Aerospace Ltd, this NSN part was specifically produced under CAGE Code 62983. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-01-521-3107 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 015213107 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 323913 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CROSS DRILLED AND CIRCULAR GROOVED" |
| AAHG | FIRST END GROOVE WIDTH | 1.6720 INCHES NOMINAL" |
| AAHH | FIRST END GROOVE DIAMETER | 0.2500 INCHES NOMINAL" |
| AAHN | END SIMILARITY | NOT IDENTICAL" |
| AAHP | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED" |
| ABHP | OVERALL LENGTH | 3.349 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | C5 ACFT" |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM" |
| AMDL | FIRST END DIAMETER | 0.8300 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM" |
| AMDX | FIRST END HOLE DIAMETER | 0.0780 INCHES NOMINAL" |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.403 INCHES NOMINAL" |
| AMFZ | SECOND END DIAMETER | 0.2500 INCHES NOMINAL" |
| AMGS | SECOND END HOLE DIAMETER | 0.0780 NOMINAL INCHES" |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.125 INCHES NOMINAL" |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.440 INCHES NOMINAL" |
| ATPC | STEP QUANTITY | 5" |
| CSPY | LARGEST STEP DIAMETER | 0.299 INCHES MINIMUM AND 0.300 INCHES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, CYLINDER BEARING" |
| FEAT | SPECIAL FEATURES | 1FIRST END HAS 0.109 DIA HOLE 0.45 INCHES DEEP; SHAFT HAS .095 DIA CROSSDRILLED HOLE THRU; 1.651 INCHES CENTER OF SHAFT'S CROSSDRILLED HOLE TO FIRST END; T.O. 9H7-3-14-3 FIG 5-4 IND 35 AND 52; USED ON HYDRAULIC POWER TRANSFER PACKAGE ASSEMB" |
| MATT | MATERIAL | STEEL" |
| AAGZ | FIRST END STYLE | CROSS DRILLED AND CIRCULAR GROOVED" |
| AAHG | FIRST END GROOVE WIDTH | 1.6720 INCHES NOMINAL" |
| AAHH | FIRST END GROOVE DIAMETER | 0.2500 INCHES NOMINAL" |
| AAHN | END SIMILARITY | NOT IDENTICAL" |
| AAHP | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED" |
| ABHP | OVERALL LENGTH | 3.349 INCHES NOMINAL" |
| AGAV | END ITEM IDENTIFICATION | C5 ACFT" |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM" |
| AMDL | FIRST END DIAMETER | 0.8300 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM" |
| AMDX | FIRST END HOLE DIAMETER | 0.0780 INCHES NOMINAL" |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.403 INCHES NOMINAL" |
| AMFZ | SECOND END DIAMETER | 0.2500 INCHES NOMINAL" |
| AMGS | SECOND END HOLE DIAMETER | 0.0780 NOMINAL INCHES" |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.125 INCHES NOMINAL" |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.440 INCHES NOMINAL" |
| ATPC | STEP QUANTITY | 5" |
| CSPY | LARGEST STEP DIAMETER | 0.299 INCHES MINIMUM AND 0.300 INCHES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, CYLINDER BEARING" |
| FEAT | SPECIAL FEATURES | 1FIRST END HAS 0.109 DIA HOLE 0.45 INCHES DEEP; SHAFT HAS .095 DIA CROSSDRILLED HOLE THRU; 1.651 INCHES CENTER OF SHAFT'S CROSSDRILLED HOLE TO FIRST END; T.O. 9H7-3-14-3 FIG 5-4 IND 35 AND 52; USED ON HYDRAULIC POWER TRANSFER PACKAGE ASSEMB" |
| MATT | MATERIAL | STEEL" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
