Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 503 4 04613 005, a Eaton Aerospace Ltd item with the NSN 5905008039858 that is listed alongside the description “Resistor Variable Wire Wound Non.” If you are interested in part number 503 4 04613 005 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 503 4 04613 005 is specifically listed with the NSN 5905-00-803-9858, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to Eaton Aerospace Ltd, this NSN part was specifically produced under CAGE Code K2523. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-803-9858 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008039858 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 906D949-5 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE SINGLE ROW |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 25.0 KILOHMS SINGLE SECTION |
| ABHP | III OVERALL LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| FEAT | SPECIAL FEATURES | O-RING SEAL AROUND SHAFT REQUIRED. DEVICE MAY BE SILICONE FILLED |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ABKW | III OVERALL HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| ABXF | SHAFT LENGTH | 0.058 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ADAT | BODY WIDTH | 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.522 INCHES NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABTB | MOUNTING HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES |
| ABMK | III OVERALL WIDTH | 0.445 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABJT | TERMINAL LENGTH | 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 900.0 NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
