Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 1C000506-01, a Eaton Hydraulics Llc item with the NSN 4720014176681 that is listed alongside the description “Hose Assembly Nonmetallic.” If you are interested in part number 1C000506-01 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 1C000506-01 is specifically listed with the NSN 4720-01-417-6681, and this code can be used to determine that it falls under FSC 4720 Hose and Tubing Flexible. Additionally, while tracing back to Eaton Hydraulics Llc, this NSN part was specifically produced under CAGE Code 45X75. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-417-6681 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014176681 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1C000131-01AA | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 1.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 1ST END" |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END" |
| ABKV | OUTSIDE DIAMETER | 2.080 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 10.000 INCHES" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.406 INCHES NOMINAL 1ST END" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.406 INCHES NOMINAL 2ND END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL 1ST END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL 2ND END" |
| AECS | BOLT HOLE QUANTITY | 4 1ST END" |
| AECS | BOLT HOLE QUANTITY | 4 2ND END" |
| AFQN | FLANGE LENGTH | 3.660 INCHES MINIMUM AND 3.720 INCHES MAXIMUM 1ST END" |
| AFQN | FLANGE LENGTH | 3.660 INCHES MINIMUM AND 3.720 INCHES MAXIMUM 2ND END" |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683" |
| AGFF | FLANGE WIDTH | 3.160 INCHES NOMINAL 1ST END" |
| AGFF | FLANGE WIDTH | 3.160 INCHES NOMINAL 2ND END" |
| AHNC | CONNECTION STYLE | PLAIN 1ST END" |
| AHNC | CONNECTION STYLE | PLAIN 2ND END" |
| AHNX | BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL 1ST END" |
| AHNX | BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL 2ND END" |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END" |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END" |
| CQBD | BURST TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER HELIX WIRE COIL AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH" |
| CRDW | HYDROSTATIC TEST PRESSURE | 300.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 21.000 INCHES NOMINAL OVERALL" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 1.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 1ST END" |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END" |
| ABKV | OUTSIDE DIAMETER | 2.080 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 10.000 INCHES" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.406 INCHES NOMINAL 1ST END" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.406 INCHES NOMINAL 2ND END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL 1ST END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL 2ND END" |
| AECS | BOLT HOLE QUANTITY | 4 1ST END" |
| AECS | BOLT HOLE QUANTITY | 4 2ND END" |
| AFQN | FLANGE LENGTH | 3.660 INCHES MINIMUM AND 3.720 INCHES MAXIMUM 1ST END" |
| AFQN | FLANGE LENGTH | 3.660 INCHES MINIMUM AND 3.720 INCHES MAXIMUM 2ND END" |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683" |
| AGFF | FLANGE WIDTH | 3.160 INCHES NOMINAL 1ST END" |
| AGFF | FLANGE WIDTH | 3.160 INCHES NOMINAL 2ND END" |
| AHNC | CONNECTION STYLE | PLAIN 1ST END" |
| AHNC | CONNECTION STYLE | PLAIN 2ND END" |
| AHNX | BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL 1ST END" |
| AHNX | BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL 2ND END" |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END" |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END" |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END" |
| CQBD | BURST TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER HELIX WIRE COIL AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH" |
| CRDW | HYDROSTATIC TEST PRESSURE | 300.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 21.000 INCHES NOMINAL OVERALL" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
