Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number MIL-DTL-10215K, a Eca Etablissement Central Des item with the NSN 6680008820965 that is listed alongside the description “Shaft Assembly Flex.” If you are interested in part number MIL-DTL-10215K and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number MIL-DTL-10215K is specifically listed with the NSN 6680-00-882-0965, and this code can be used to determine that it falls under FSC 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. Additionally, while tracing back to Eca Etablissement Central Des, this NSN part was specifically produced under CAGE Code SCY13. With our services and dedication to simple procurement in mind, get started with us today!
| MRC | Criteria | Characteristic |
|---|---|---|
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M10215-1F107 |
| CFRW | END OVERALL DIAMETER | 1.188 INCHES NOMINAL FIRST END 0.875 INCHES NOMINAL SECOND END |
| CFRN | CASING SURFACE TREATMENT | ANY ACCEPTABLE |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END UNF SECOND END |
| AKMF | CORE SURFACE TREATMENT | CADMIUM PLATED |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| BJPS | CASING MATERIAL | RUBBER AND STEEL |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| ZZZV | III FSC APPLICATION DATA | SPEEDOMETER,VEHICULAR |
| CFRP | CASING LENGTH BETWEEN FERRULES | 67.500 INCHES NOMINAL |
| CFRZ | CORE OVERALL LENGTH | 68.812 INCHES NOMINAL |
| ABUJ | (NON-CORE DATA) THREAD SIZE | 7/8-18 5/8-18 |
| APTD | END TYPE | ROUND KEYED FIRST END SQUARE MALE SECOND END |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END 0.750 INCHES NOMINAL SECOND END |
| CFSM | (NON-CORE DATA) STRENGTH RATING CHARACTERISTICS | 15.0 POUNDS TORSION STRENGTH EITHER DIRECTION |
| AJXJ | CORE MATERIAL | STEEL |
| SR-1 | MANUFACTURERS CODE | 81349 |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.150 INCHES MINIMUM DIAMETER AND 0.153 INCHES MAXIMUM DIAMETER FIRST END 0.101 INCHES MINIMUM ACROSS FLATS AND 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END |
| CFRQ | CASING OUTSIDE DIAMETER | 0.300 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| ABHP | OVERALL LENGTH | 68.812 INCHES NOMINAL |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-10215K |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| AAJD | THREAD CLASS | 2B FIRST END 2B SECOND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AECT | THREAD DEPTH | 0.327 INCHES NOMINAL FIRST END 0.375 INCHES NOMINAL SECOND END |
| AEDN | TIP LENGTH | 1.018 INCHES MINIMUM AND 1.022 INCHES MAXIMUM FIRST END 0.950 INCHES MINIMUM AND 1.010 INCHES MAXIMUM SECOND END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
