Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 504001, a Elder And Co item with the NSN 3110009534495 that is listed alongside the description “Bearing Ball Annular.” If you are interested in part number 504001 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 504001 is specifically listed with the NSN 3110-00-953-4495, and this code can be used to determine that it falls under FSC 3110 Bearings Antifriction Unmounted. Additionally, while tracing back to Elder And Co, this NSN part was specifically produced under CAGE Code 56152. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-953-4495 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 009534495 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 307SZZ4ABEC1 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 35.00 MILLIMETERS NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 3.9990 INCHES MINIMUM AND 4.0000 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 1.1150 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 21.00 MILLIMETERS NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| FEAT | SPECIAL FEATURES | INNER RING ROUNDED ON BOTH SIDES 0.060 IN. RADIUS; OUTER RING CHAMFERED 0N INSIDE 0.031 IN. WIDE BY 60 DEG; OUTER RING ROUNDED ON OUTSIDE 0.060 IN. RADIUS ON SIDE WITH PART NO. MARKING,0.375 IN. RADIUS ON NONMARKED SIDE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | ALVANIA 3,FSCM 54527 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL RETAINER |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RING,NON-SEPARABLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
