Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 8GGW7402S1, a Electro Devices Inc item with the NSN 2920009434668 that is listed alongside the description “Generator Engine Accessory.” If you are interested in part number 8GGW7402S1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 8GGW7402S1 is specifically listed with the NSN 2920-00-943-4668, and this code can be used to determine that it falls under FSC 2920 Engine Electrical System Components Nonaircraft. Additionally, while tracing back to Electro Devices Inc, this NSN part was specifically produced under CAGE Code 61972. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-943-4668 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 009434668 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 942178 | 3 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPT | SECOND STEP DIAMETER | 0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| ABVA | UNTHREADED PORTION LENGTH | 1.120 INCHES NOMINAL |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ADER | MOUNTING STYLE | BRACKET MTD W/FOUR MTG HOLES,TWO TOP HOLES THREADED |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | 0.669 INCHES NOMINAL |
| AXHX | GROUND POLARITY TYPE | POSITIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2460 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1130 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END,THREADED,W/KEYWAY |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.380 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.190 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 17.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 163.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 6.694 INCHES NOMINAL |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 7.561 INCHES MINIMUM AND 7.574 INCHES MAXIMUM |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| BCML | ANGULAR DEVIATION OF THIRD HOLE FROM SECOND HOLE IN DEG | 34.0 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| BZRR | THREAD SERIES | SI-M |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.313 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 6.0 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
